TM 5-3805-298-23-1
0077
Table 1. Transmission Does Not Operate in First, Second, or Third Gear, Forward - Continued.
077
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
NOTE
Transmission Does Not
Operate in First, Second, or
Rubber cap assembly can interfere with seating of quick disconnect
Third Gear, Forward -
fitting. Remove rubber cap assembly from transmission relief valve
Continued
connector before connecting quick disconnect fitting.
5. Remove cap (Figure 2, Item 1)
from transmission clutch 1
solenoid valve (Figure 2, Item 2).
6. Connect transmission clutch
pressure test gauge assembly
hose (Figure 1, Item 2) to
connector on transmission clutch 1
solenoid valve (Figure 2, Item 2).
Figure 2. Transmission Clutch 1 Pressure Connection.
0077
7. Turn battery disconnect switch ON
and start engine (TM 5-3805-298-
10).
8. Raise the work tool above the
ground (TM 5-3805-298-10).
9. Turn transmission neutralizer
switch to OFF (TM 5-3805-298-
10).
10. Warm the transmission oil to
normal operating temperature of
approximately 165F to 185F
(75C to 85C).
