TM 5-3805-298-23-1
0089
Table 1. 368 Auto-Shift Rocker Switch Diagnostic Codes - Continued.
089
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
4. Using digital multimeter
Continuity - Proceed to Test Step 4.
368-4 Auto-Shift Switch
(WP 0174), test for continuity
Voltage Is Below Normal -
No Continuity - Proceed to step 5.
between connector HN-C6
Continued
(WP 0012, Figure 67) terminal 1
and terminal 4.
5. Using digital multimeter
Continuity - Proceed to Test Step 5.
(WP 0174), test for continuity
No Continuity - Proceed to step 6.
between connector HN-C6
(WP 0012, Figure 67) terminal 1
and terminal 2.
6. Using digital multimeter
Continuity - Proceed to Test Step 6.
(WP 0174), test for continuity
No Continuity - Proceed to Test Step 7.
between connector HN-C6
(WP 0012, Figure 67) terminal 4
and terminal 2.
Test Step 4. Test for Shorted Lower
Cab Wiring Harness for Circuit Auto
and Manual.
1. Disconnect connector C-C1
(WP 0012, Figure 65) from
connector HN-C1 (WP 0012,
Figure 66).
2. Using digital multimeter
Continuity - Replace lower cab wiring
(WP 0174), test for continuity
harness (WP 0291).
between connector C-C1
Proceed to Test Step 11.
(WP 0012, Figure 65) terminal 29
No Continuity - Replace main cab
and terminal 26.
wiring harness (WP 0293).
Proceed to Test Step 11.
Test Step 5. Test for Shorted Lower
Cab Wiring Harness for Circuit Auto
and Manual.
1. Disconnect connector C-C1
(WP 0012, Figure 65) from
connector HN-C1 (WP 0012,
Figure 66).
2. Using digital multimeter
Continuity - Replace lower cab wiring
(WP 0174), test for continuity
harness (WP 0291).
between connector C-C1
Proceed to Test Step 11.
(WP 0012, Figure 65) terminal 29
No Continuity - Replace main cab
and terminal 7.
wiring harness (WP 0293).
Proceed to Test Step 11.
0089-9
