TM 5-3805-298-23-1
0110
Table 1. 1401 Solenoid Valve 1 (Forward Low) Diagnostic Codes - Continued.
0110
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
5. Using digital multimeter
Continuity Replace lower cab wiring
1401-6 Solenoid Valve 1
(WP 0174), test for continuity
harness (WP 0291).
(Forward Low) Current
between connector C-C12
Above Normal - Continued
Proceed to Test Step 5.
(WP 0012, Figure 26) terminal 65
No Continuity Replace transmission
and ground.
ECM (WP 0266).
Proceed to Test Step 5.
Test Step 5. Verify Malfunction Is
Resolved.
1. Ensure all wiring harness
connectors are connected.
2. Install transmission ECM cover
(WP 0266).
3. Install left and right lower cab
access panels (WP 0347).
4. Install right engine access panel
(WP 0348).
5. Apply and hold service brake, start
Diagnostic Code 1401-6 Solenoid
engine, and shift transmission into
Valve 1 (Forward Low) Current
first gear forward
Above Normal Becomes Inactive
(TM 5-3805-298-10). Using MSD,
Troubleshooting complete.
check for active diagnostic codes
Diagnostic Code 1401-6 Solenoid
Valve 1 (Forward Low) Current
Above Normal Remains Active
Repeat troubleshooting from the
beginning.
END OF WORK PACKAGE
0110-9/(10 blank)