TM 5-3805-298-23-1
0112
Table 1. 1403 Solenoid Valve 3 (Reverse) Diagnostic Codes - Continued.
0112
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
4. Using digital multimeter
1403-6 Solenoid Valve 3
Continuity Replace lower cab wiring
(WP 0174), test for continuity
(Reverse) Current Above
harness (WP 0291).
between connector C-C12
Normal - Continued
Proceed to Test Step 5.
(WP 0012, Figure 26) terminal 66
No Continuity Proceed to step 5.
and terminal 55.
5. Using digital multimeter
Continuity Replace lower cab wiring
(WP 0174), test for continuity
harness (WP 0291).
between connector C-C12
Proceed to Test Step 5.
(WP 0012, Figure 26) terminal 66
No Continuity Replace transmission
and ground.
ECM (WP 0266).
Proceed to Test Step 5.
Test Step 5. Verify Malfunction Is
Resolved.
1. Ensure all wiring harness
connectors are connected.
2. Install transmission ECM cover
(WP 0266).
3. Install left and right lower cab
access panels (WP 0347).
4. Install right engine access panel
(WP 0348).
5. Apply and hold service brake, start
Diagnostic Code 1403-6 Solenoid
engine, and shift transmission into
Valve 3 (Reverse) Current Above
first gear reverse
Normal Becomes Inactive
(TM 5-3805-298-10). Using MSD,
Troubleshooting complete.
check for active diagnostic codes
Diagnostic Code 1403-6 Solenoid
Valve 3 (Reverse) Current Above
Normal Remains Active Repeat
troubleshooting from the beginning.
END OF WORK PACKAGE
0112-9/(10 blank)