TM 5-3805-298-23-2
0143
Table 1. Excessive Force Needed to Turn Steering Wheel - Continued.
0143
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 8. Verify Malfunction Is
Excessive Force Needed To
Resolved.
Turn Steering Wheel -
1. Turn ignition switch and battery
Continued
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Ensure all hydraulic hoses are
connected.
3. Install main control valve cover
(WP 0371).
4. Perform Steering Force Check
Force to Turn Steering Wheel Is
13 to 32 lb-in. (1.46-3.61 Nm)
Proceed to step 5.
Force to Turn Steering Wheel Is
Greater Than 32 lb-in. (3.61 Nm)
Repeat troubleshooting from the
beginning.
5. Turn battery disconnect switch to
ON position and start engine
(TM 5-3805-298-10).
6. Warm the transmission oil to
normal operating temperature of
approximately 165F to 185F
(75C to 85C).
7. Perform Steering Force Check
Force to Turn Steering Wheel Is
13-17 lb-in. (1.46 1.92 Nm)
Troubleshooting complete.
Force to Turn Steering Wheel Is
Greater Than 17 lb-in. (1.92 Nm)
Repeat troubleshooting from the
beginning.
END OF WORK PACKAGE
0143-6
