TM 5-3805-298-23-2
0144
Table 1. Machine Does Not Turn when Steering Wheel Is Turned - Continued.
0144
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Machine Does Not Turn
Test Step 6. Inspect Steering
When Steering Wheel Is
Cylinders.
Turned - Continued
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Visually inspect steering cylinders
Steering Cylinders Are Not Damaged
for damage (WP 0336).
Proceed to step 3.
Steering Cylinders Damaged
Repair or replace steering cylinders
(WP 0336).
Proceed to Test Step 7.
3. Visually inspect steering linkage
Steering Linkage Is Not Damaged or
for damage or restrictions
Restricted Replace hand metering
(WP 0336).
pump (WP 0334).
Proceed to Test Step 7.
Steering Linkage Damaged or
Restricted Repair or replace steering
linkage (WP 0336).
Proceed to Test Step 7.
Test Step 7. Verify Malfunction Is
Resolved.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Ensure all hydraulic hoses are
connected.
3. Install main control valve cover
(WP 0371).
4. Turn battery disconnect switch to
ON position and start engine
(TM 5-3805-298-10).
5. Perform Steering Wheel Slip
Time Required for Steering Left and/
or Right Is Normal Troubleshooting
Check (WP 0166).
complete.
Time Required for Steering Left and/
or Right Is Excessive Repeat
troubleshooting from the beginning.
END OF WORK PACKAGE
0144-5/(6 blank)
