TM 5-3805-298-23-2
0145
Table 1. Machine Turns Slowly in One or Both Directions - Continued.
0145
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Machine Turns Slowly in
Test Step 7. Inspect Steering
One or Both Directions -
Cylinders.
Continued
1. Visually inspect steering cylinders
Steering Cylinders Are Not Leaking
for Class III leaks (WP 0336).
Proceed to step 2.
Steering Cylinders Are Leaking
Repair or replace steering cylinders
(WP 0336).
Proceed to Test Step 8.
2. Visually inspect steering linkage
Steering Linkage Is Not Damaged or
Restricted Replace hand metering
for damage or restrictions
pump (WP 0334).
(WP 0336).
Proceed to Test Step 8.
Steering Linkage Damaged or
Restricted Repair or Replace
steering linkage (WP 0336).
Proceed to Test Step 8.
Test Step 8. Verify Malfunction Is
Resolved.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-298-10).
2. Ensure all hydraulic hoses are
connected.
3. Install main control valve cover
(WP 0371).
4. Perform Steering Wheel Time
Steering Cycle Time Is Correct in
Check (WP 0166).
Both Directions Troubleshooting
complete.
Steering Cycle Time Is Not Correct in
Both Directions Repeat
troubleshooting from the beginning.
Steering Cycle Time Is Not Correct in
One Direction Repeat
troubleshooting from the beginning.
END OF WORK PACKAGE
0145-6
