TM 5-3805-298-23-2
0146
Table 1. Machine Will Not Stay in a Straight Line - Continued.
0146
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Machine Will Not Stay in a
Test Step 4. Inspect Steering
Straight Line - Continued
Cylinders.
1. Visually inspect steering cylinders
Steering Cylinders Are Not Damaged
for damage (WP 0336).
Proceed to step 2.
Steering Cylinders Damaged
Repair or replace steering cylinders
(WP 0336).
Proceed to Test Step 5.
2. Visually inspect steering linkage
Steering Linkage Is Not Damaged or
Restricted Replace hand metering
for damage or restrictions
pump (WP 0336).
(WP 0336).
Proceed to Test Step 5.
Steering Linkage Damaged or
Restricted Repair or replace steering
linkage (WP 0336).
Proceed to Test Step 5.
Test Step 5. Verify Malfunction Is
Resolved.
1. Ensure all hydraulic hoses are
connected.
2. Install main control valve cover
(WP 0371).
3. Turn battery disconnect switch ON
and start engine
(TM 5-3805-298-10).
4. Attempt to drive machine in a
Machine Drives Straight
straight line (TM 5-3805-298-10).
Troubleshooting complete.
Machine Will Not Drive Straight
Repeat troubleshooting from the
beginning.
END OF WORK PACKAGE
0146-4
