TM 5-3805-298-23-2
0177
REMOVAL CONTINUED
CAUTION
Cap all hydraulic openings along with component connections during removal to protect
against contamination. Failure to follow this caution may result in damage to equipment.
NOTE
Tag and mark all hoses and tubes to aid in installation.
Note routing of hoses and tubes for installation.
30. Loosen tube nut (Figure 17, Item 1) and remove hose (Figure 17, Item 10) and O-ring (Figure 17, Item 2) from
steering manifold (Figure 17, Item 3). Discard O-ring.
31. Loosen tube nut (Figure 17, Item 6) and remove hose (Figure 17, Item 9) and O-ring (Figure 17, Item 5) from
solenoid valve tee (Figure 17, Item 4). Discard O-ring.
NOTE
Tag and mark electrical connectors and note cable and wiring harness routing to aid in
installation.
32. Disconnect steering manifold sensor connector (Figure 17, Item 7) from wiring harness connector
(Figure 17, Item 8).
Figure 17. Steering Manifold and Solenoid Valve.
0177
