TM 5-3805-298-23-2
0194
REMOVAL
000194
CAUTION
Clean area around engine oil level gauge prior to removing engine oil level gauge tube
assembly from oil pan. Failure to follow this caution may result in damage to equipment.
1. Remove engine oil level gauge (Figure 1, Item 2) from engine oil level gauge tube assembly (Figure 1, Item 1).
CAUTION
Install cap on engine oil level gauge tube assembly opening on engine to prevent
contamination or debris from entering engine oil pan. Failure to follow this caution may
result in damage to equipment.
NOTE
Seal may not come out with engine oil level gauge tube assembly. Ensure seal is removed
prior to installing new engine oil level gauge tube assembly.
2. Loosen nut (Figure 1, Item 4) and remove engine oil level gauge tube assembly (Figure 1, Item 1) and seal
(Figure 1, Item 5) from engine. Discard seal.
NOTE
O-rings on engine oil level gauge are reusable, if undamaged.
Only remove O-rings from oil level gauge if damage.
3. Remove two O-rings (Figure 1, Item 3) from engine oil level gauge (Figure 1, Item 2), if damaged. Discard
O-rings.
Figure 1. Engine Oil Level Gauge.
0194
END OF TASK