TM 5-3805-298-23-2
0234
GEAR MOTOR AND DEMAND FAN SOLENOID REMOVAL CONTINUED
5. Loosen three tube nuts (Figure 4, Item 4) and remove three hoses (Figure 4, Item 8) and O-rings (Figure 4,
Item 9) from gear motor (Figure 4, Item 5). Discard O-rings.
6. Disconnect rear frame wiring harness connector (Figure 4, Item 7) from demand fan solenoid
(Figure 4, Item 6).
7. Remove two bolts (Figure 4, Item 3), washers (Figure 4, Item 2), nuts (Figure 4, Item 11), washers (Figure 4,
Item 10), and gear motor (Figure 4, Item 5) from fan support (Figure 4, Item 1).
Figure 4. Gear Motor.
0234
