TM 5-3805-298-23-2
0236
REMOVAL
000236
NOTE
Tag and mark wiring harness connectors to aid in installation.
1. Remove tiedown strap (Figure 1, Item 3) from engine wiring harness connector (Figure 1, Item 2) and service
brake charging oil pressure sensor connector (Figure 1, Item 4). Discard tiedown strap.
2. Disconnect engine wiring harness connector (Figure 1, Item 2) from service brake charging oil pressure sensor
connector (Figure 1, Item 4).
3. Remove service brake charging oil pressure sensor (Figure 1, Item 1) from engine.
4. Remove O-ring (Figure 1, Item 5) from service brake charging oil pressure sensor (Figure 1, Item 1). Discard
O-ring.
Figure 1. Service Brake Charging Oil Pressure Sensor.
0236
END OF TASK
CLEANING AND INSPECTION
000236
Clean and inspect all parts IAW Mechanical General Maintenance Instruction (WP 0172).
END OF TASK
