TM 5-3805-298-23-4
0404
ARCTIC FUEL METERING PUMP REMOVAL
000404
NOTE
Tag and mark electrical connectors and note routing to aid installation.
1. Disconnect rear frame wiring harness connector (Figure 9, Item 7) from fuel metering pump (Figure 9, Item 4).
2. Loosen clamp (Figure 9, Item 5) and remove hose (Figure 9, Item 6) from fuel metering pump
(Figure 9, Item 4).
3. Loosen clamp (Figure 9, Item 2) and remove hose (Figure 9, Item 1) from fuel metering pump
(Figure 9, Item 4).
4. Loosen clamp (Figure 9, Item 3) and remove fuel metering pump (Figure 6, Item 4) from machine.
5. Remove two bolts (Figure 9, Item 12), washers (Figure 9, Item 11), and bracket (Figure 9, Item 10) from
machine.
NOTE
Bracket removal is only necessary if damaged.
6. Remove two bolts (Figure 9, Item 8), washers (Figure 9, Item 9), and clamp (Figure 9, Item 3) from bracket
(Figure 9, Item 10).
Figure 9. Fuel Metering Pump.
0404
END OF TASK
CLEANING AND INSPECTION
000404
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0172).
END OF TASK
