DISCONNECTING AND CONNECTING WIRING HARNESS CONNECTORS
This procedure describes how to disconnect and connect the various wiring harness connectors found on the
Backhoe Loader (BHL).
When disconnecting connector, never pull on wires. Always pull on the connector body
when disconnecting connector. Failure to follow this caution may result in damage to
Double Press Tab Connector (12-Pin)
1. To disconnect connector, press and hold two tabs (Figure 1, Item 1) while pulling connector body.
2. To connect connector, push connector ends together until tabs (Figure 1, Item 2) click and connector body can-
not be pulled apart.
Figure 1. Double Press Tab Connector (12-Pin).