MWO 5-3805-262-25-1
WARNING
OR WHEN CENTER-PUNCHING (3) HOLES.
1. TAPE TEAR-OUT TEMPLATE TO RIGHT
HAND HOOD POST 7 1/2 INCHES UP FROM
EDGE OF FRAME.
2. CENTER-PUNCH HOLES TO BE DRILLED.
3. REMOVE TAPED TEMPLATE FROM POST.
4. PILOT DRILL HOLES (3) USING 1/8 INCH
DRILL BIT OR EQUIVALENT.
5. USE 5/16 INCH DRILL BIT AND FINALIZE
DRILLING HOLES (3).
Figure 3. Tear-out Template, Right Hand Hood Post
11
