TM 5-2420-231-23-1
0044
Table 1. Front Blackout Light Does Not Function Correctly - Continued.
044
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. Remove bolt (Figure 2, Item 2),
Front Blackout Light Does
washer (Figure 2, Item 3), nut
Not Function Correctly -
(Figure 2, Item 9), lockwasher
Continued
(Figure 2, Item 10), two eyelet ter-
minals (Figure 2, Items 4 and 7),
blackout light (Figure 2, Item 1),
and spacer (Figure 2, Item 11)
from bracket (Figure 2, Item 8).
Discard lockwasher.
4. Using a digital multimeter, mea-
Resistance 5.0 Ohms or Less -
sure resistance between blackout
Proceed to Test Step 5.
light eyelet (Figure 2, Item 4) (WP
Resistance Greater Than 5.0 Ohms -
0007, Figure 124) terminal 30 and
Proceed to Test Step 5.
machine ground. Resistance
should be 5.0 ohms or less.
Figure 2. Blackout Light.
0044
Test Step 4. Check for Open Circuit
in Main Chassis Wiring Harness to
Ground.
1. Remove small bolt from cover
(Figure 3, Item 4).
2. Remove nut (Figure 3, Item 8), bolt
(Figure 3, Item 2), washer (Figure
3, Item 3), lockwasher (Figure 3,
Item 7), three clamps (Figure 3,
Item 6), two spacers (Figure 3,
Item 1), and cover (Figure 3,
Item 5) from machine. Discard
lockwasher.