TM 5-2420-231-23-1
0058
Table 1. Transmission Does Not Disengage When Clutch Cutout Switch
Is Activated - Continued.
058
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. Press the M button to enter the
Front Display Screen Illuminates the
Transmission Does Not
Clutch Cutout Switch Input - Proceed
input test mode ("It"), and monitor
Disengage When Clutch
and record the clutch cutout switch
to Test Step 2.
Cutout Switch Is Activated -
input (WP 0006).
Front Display Screen Does Not
Continued
Illuminate the Clutch Cutout Switch
Input - Proceed to step 4.
4. Activate the clutch cutout switch
Front Display Screen Illuminates the
(Figure 2, Item 1) on the front end
Clutch Cutout Switch Input - Replace
control lever (Figure 2, Item 2) (TM
transmission controller (WP 0168).
5-2420-231-10).
Proceed to Test Step 5.
Front Display Screen Does Not
Illuminate the Clutch Cutout Switch
Input - Deactivate the clutch cutout
switch (TM 5-2420-231-10).
Proceed to Test Step 2.
Figure 2. Clutch Cutout Switch.
0058
Test Step 2. Test Clutch Cutout
Switch.
1. Turn ignition switch to the off posi-
tion (TM 5-2420-231-10) and dis-
connect batteries (WP 0157).
2. Remove front instrument panel
right-side cover (WP 0176).