TM 5-2420-231-23-2
0187
REMOVAL CONTINUED
13. Disconnect pilot controls wiring harness connector (Figure 9, Item 1) from machine wiring harness connector
(Figure 9, Item 4).
14. Disconnect pilot controls wiring harness connector (Figure 9, Item 2) from machine wiring harness connector
(Figure 9, Item 3).
15. Remove tiedown straps (Figure 9, Item 5) from pilot controls wiring harness (Figure 9, Item 6).
NOTE
Note routing of pilot controls wiring harness to aid in installation.
16. Remove pilot controls wiring harness (Figure 9, Item 6) from machine.
Figure 9. Pilot Controls Wiring Harness.
0187
END OF TASK
CLEANING AND INSPECTION
0187
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
INSTALLATION
0187
1. Position pilot controls wiring harness (Figure 9, Item 6) on machine.
2. Install new tiedown straps (Figure 9, Item 5) on pilot controls wiring harness (Figure 9, Item 6).
3. Connect pilot controls wiring harness connector (Figure 9, Item 2) to machine wiring harness connector
(Figure 9, Item 3).
4. Connect pilot controls wiring harness connector (Figure 9, Item 1) to machine wiring harness connector
(Figure 9, Item 4).
