TM 5-2420-231-23-2
0211
INSTALLATION
0211
WARNING
Allow hydraulic system to cool before performing procedure. Hot metal parts can cause
severe burns. Wear eye, hand, and skin protection when working with heated parts.
Hydraulic oil is very slippery. Immediately wipe up any spills.
Failure to follow these warnings may result in injury or death to personnel.
NOTE
Install oil cooler hoses as tagged and marked during removal.
Install oil cooler hoses in position and orientation noted during removal.
1. Connect hydraulic oil cooler hose (Figure 9, Item 2) and tighten clamp (Figure 9, Item 1) on fitting
(Figure 9, Item 3).
Figure 9. Hydraulic Oil Cooler Hose at Fitting.
0211