TM 5-2420-231-23-2
0228
ADJUSTMENT
0228
1. Loosen jamnut (Figure 12, Item 2) on brake cable (Figure 12, Item 1).
2. Remove cotter pin (Figure 12, Item 5) and retaining pin (Figure 12, Item 6) from brake cable clevis
(Figure 12, Item 3) and brake lever (Figure 12, Item 4). Discard cotter pin.
3. Turn brake cable clevis (Figure 12, Item 3) on brake cable (Figure 12, Item 1) to remove excess slack in brake
cable.
4. Install retaining pin (Figure 12, Item 6) on brake cable clevis (Figure 12, Item 3) and brake lever
(Figure 12, Item 4).
5. Install new cotter pin (Figure 12, Item 5) on retaining pin (Figure 12, Item 6).
Figure 12. Rear Cable Adjustment.
0228