TM 5-2420-231-23-2
0228
CLEANING AND INSPECTION
0228
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
END OF TASK
INSTALLATION
0228
NOTE
Install clevis in position noted during removal.
1. Install jamnut (Figure 6, Item 2) on brake cable (Figure 6, Item 3).
2. Install clevis (Figure 6, Item 1) on brake cable (Figure 6, Item 3) and tighten jamnut (Figure 6, Item 2).
3. Install two bolts (Figure 7, Item 1), brake cable clevis (Figure 7, Item 2), clamp (Figure 7, Item 3), two new
lockwashers (Figure 7, Item 6), and nuts (Figure 7, Item 5) on brake cable (Figure 7, Item 4).
Figure 7. Cable Clevis.
0228