TM 5-2420-231-23-2
0255
REMOVAL CONTINUED
NOTE
Note location and quantity of tiedown straps to aid in installation.
9. Remove tiedown straps (Figure 6, Item 2) from side options wiring harness (Figure 6, Item 1). Discard tiedown
straps.
10. Disconnect side options wiring harness connector (Figure 6, Item 4) from side console wiring harness
connector (Figure 6, Item 3).
11. Remove side options wiring harness (Figure 6, Item 1) from machine.
Figure 6. Side Options Wiring Harness.
0255
END OF TASK
CLEANING AND INSPECTION
0255
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
INSTALLATION
0255
1. Install side options wiring harness (Figure 6, Item 1) on machine.
2. Connect side options wiring harness connector (Figure 6, Item 4) to side console wiring harness connector
(Figure 6, Item 3).
NOTE
Install tiedown straps as noted during removal.
3. Install new tiedown straps (Figure 6, Item 2) on side options wiring harness (Figure 6, Item 1).
