TM 5-2420-231-23-3
0259
INSTALLATION CONTINUED
7. Position front backhoe bucket coupler hydraulic tube (Figure 6, Item 9) on machine.
8. Connect front backhoe bucket coupler hydraulic tube (Figure 6, Item 9) to hydraulic hose (Figure 6, Item 7).
9. Connect front backhoe bucket coupler hydraulic tube (Figure 6, Item 9) to hydraulic hose (Figure 6, Item 14).
10. Position front backhoe bucket coupler hydraulic tube (Figure 6, Item 3) on machine.
11. Connect front backhoe bucket coupler hydraulic tube (Figure 6, Item 3) to hydraulic hose (Figure 6, Item 6).
12. Connect front backhoe bucket coupler hydraulic tube (Figure 6, Item 3) to hydraulic hose (Figure 6, Item 1).
WARNING
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may result in injury to personnel.
13. Apply sealing compound to captured bolt (Figure 6, Item 13).
14. Install spacer (Figure 6, Item 11), clamp (Figure 6, Item 12), washer (Figure 6, Item 10), and nut (Figure 6,
Item 2) on captured bolt (Figure 6, Item 13).
15. Apply sealing compound to bolt (Figure 6, Item 5).
16. Install clamp (Figure 6, Item 8), washer (Figure 6, Item 4), and bolt (Figure 6, Item 5) on machine.
Figure 6. Front Backhoe Bucket Coupler Hydraulic Tubes.
0259
END OF TASK
FOLLOW-ON TASKS
0259
Install backhoe dipper cylinder (WP 0275).
END OF TASK
END OF WORK PACKAGE