TM 5-2420-231-23-3
0342
REMOVAL CONTINUED
9. Remove nut (Figure 6, Item 1) and washer (Figure 6, Item 3) from wiper motor shaft (Figure 6, Item 2).
10. Remove wiper motor (Figure 6, Item 5) from crossmember (Figure 6, Item 4).
Figure 6. Wiper Motor.
0342
END OF TASK
CLEANING AND INSPECTION
0342
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
INSTALLATION
0342
1. Install wiper motor (Figure 6, Item 5) on crossmember (Figure 6, Item 4).
NOTE
Wiper shaft nut is installed half way to prevent wiper motor from falling out during blower
housing installation.
2. Install washer (Figure 6, Item 3) and nut (Figure 6, Item 1) half way on wiper motor shaft (Figure 6, Item 2).