TM 5-2420-231-23-3
0343
REMOVAL CONTINUED
3. Remove tiedown strap (Figure 2, Item 3) from wiring connectors (Figure 2, Items 1, 2, 5, and 6). Discard
tiedown strap.
4. Disconnect wiper motor wiring harness connector (Figure 2, Item 2) from machine wiring harness connector
(Figure 2, Item 1).
5. Disconnect wiper motor wiring harness connector (Figure 2, Item 5) from machine wiring harness connector
(Figure 2, Item 6).
6. Remove wiper motor (Figure 2, Item 4) from machine.
Figure 2. Wiper Motor Connector.
0343
END OF TASK
CLEANING AND INSPECTION
0343
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
INSTALLATION
0343
1. Install wiper motor (Figure 2, Item 4) on machine.
2. Connect wiper motor wiring harness connector (Figure 2, Item 5) to machine wiring harness connector
(Figure 2, Item 6).
3. Connect wiper motor wiring harness connector (Figure 2, Item 2) to machine wiring harness connector
(Figure 2, Item 1).
4. Install new tiedown strap (Figure 2, Item 3) on wiring connectors (Figure 2, Items 1, 2, 5, and 6).