TM 5-2420-231-23-3
0348
REMOVAL CONTINUED
4. Remove blower motor seal (Figure 2, Item 2) from blower housing (Figure 2, Item 1).
5. Remove two duct seals (Figure 2, Item 3) from blower housing (Figure 2, Item 1).
6. Remove two duct seals (Figure 2, Item 4) from blower housing (Figure 2, Item 1).
7. Remove duct seal (Figure 2, Item 5) from blower housing (Figure 2, Item 1).
Figure 2. Blower Housing Seals.
0348
END OF TASK
CLEANING AND INSPECTION
0348
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
INSTALLATION
0348
1. Install duct seal (Figure 2, Item 5) on blower housing (Figure 2, Item 1).
2. Install two duct seals (Figure 2, Item 4) on blower housing (Figure 2, Item 1).
3. Install two duct seals (Figure 2, Item 3) on blower housing (Figure 2, Item 1).
4. Install duct seal (Figure 2, Item 2) on blower housing (Figure 2, Item 1).
