TM 5-2420-231-23-3
0350
REMOVAL CONTINUED
7. Remove two pieces of duct tape (Figure 7, Item 4) from filter tray (Figure 7, Item 3) and position wiring harness
(Figure 7, Item 5) away from filter tray. Discard duct tape.
8. Remove two locknuts (Figure 7, Item 1) and washers (Figure 7, Item 2) from filter tray (Figure 7, Item 3).
Discard locknuts.
9. Disconnect two locking tabs (Figure 7, Item 6) from main housing (Figure 7, Item 7) and remove filter tray
(Figure 7, Item 3) from machine.
Figure 7. Filter Tray.
0350
END OF TASK
CLEANING AND INSPECTION
0350
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Inspect seal (Figure 8, Item 2) on duct (Figure 8, Item 1) for tears and damage. Remove seal if torn or dam-
aged.
Figure 8. Heater Duct Seal.
0350