TM 5-2420-231-23-3
0359
CLEANING AND INSPECTION
0359
1. Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0369).
2. Clean and inspect all parts IAW Electrical General Maintenance Instructions (WP 0370).
END OF TASK
INSTALLATION
0359
WARNING
Refrigerant oil is slippery. Wipe up any spills immediately. Failure to follow this warning
may result in injury to personnel.
NOTE
A/C O-rings are lubricated with refrigerant oil prior to assembly.
1. Lubricate new O-ring (Figure 2, Item 6) with refrigerant oil from a sealed container and install O-ring on fitting
(Figure 2, Item 7).
2. Install A/C low-pressure sensor (Figure 2, Item 3) on fitting (Figure 2, Item 7).
3. Connect A/C low-pressure sensor wiring harness connector (Figure 2, Item 4) to machine wiring harness con-
nector (Figure 2, Item 5).
4. Install cover (Figure 2, Item 2) on headliner (Figure 2, Item 1).
5. Install side cover (Figure 3, Item 2) and five new fasteners (Figure 3, Item 1) on machine.
Figure 3. Side Cover.
0359
END OF TASK