TM 5-2420-231-23-3
0370
DISCONNECTING AND CONNECTING WIRING HARNESS CONNECTORS CONTINUED
Pull Tab Connector
000370
1. To disconnect connector, lift tab (Figure 6, Item 1) just enough to clear retainer on mating connector and pull on
connector body.
2. To connect connector, push connector ends together until tab (Figure 6, Item 1) clicks and connector body can-
not be pulled apart.
Figure 6. Pull Tab Connector.
0370
Lock Lever Connector
000370
1. To disconnect connector, pull the red lock lever (Figure 7, Item 1) outward toward the rear of the machine,
while slightly pulling downward on connector.
2. To connect connector, push connector ends together and push the red lock lever (Figure 7, Item 1) inward
toward the front of the machine.
Figure 7. Lock Lever Connector.
0370
