TM 5-3805-255-14
0018
Table 1. Field PMCS for the H100C Loader - (Continued).
LOCATION
ITEM TO
CHECK/
NOT FULLY MISSION
CAPABLE IF:
SERVICE
ITEM NO. INTERVAL
PROCEDURE
Bimonthly
Turbocharger
e. As a precaution against dirt getting Class III oil leak is evident.
6
into engine, frequently inspect flexible
rubber hose connections clamped to
turbocharger compressor housing. If
signs of deterioration are evident,
replace immediately.
f. To eliminate undue strain on rubber
hose connections, ensure pipes are
properly aligned.
a. Loosen fan guard mounting bolts
Belt missing.
Monthly
Air Compressor
7
Belt Adjustment
and remove fan guard.
b. Loosen four compressor mounting
nuts.
c. Move compressor out to tighten
belt or in to loosen it.
d. When correct belt tension is
obtained, tighten nuts. Refer to Table 2
and Table 3.
e. Install fan guard.
Figure 3. Air Compressor Belt Adjustment.
0018
0018-7