TM 5-3805-255-14
0025
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0019).
END OF TASK
INSTALLATION
00025
1. Install engine breather (Figure 2, Item 4) on engine.
2. Install new gasket (Figure 2, Item 3) on engine breather (Figure 2, Item 4). Install engine breather on engine.
3. Install flat washer (Figure 2, Item 12) and bolt (Figure 2, Item 5) on engine breather (Figure 2, Item 4) housing.
4. Install flat washer (Figure 2, Item 10) and bolt (Figure 2, Item 11) on filter support bracket (Figure 2, Item 6).
5. Install clamp (Figure 2, Item 9), flat washer (Figure 2, Item 8), and bolt (Figure 2, Item 7) on filter support
bracket (Figure 2, Item 6).
6. Install flat washer (Figure 2, Item 2) and bolt (Figure 2, Item 1) on filter support bracket (Figure 2, Item 6).
7. Install clamp (Figure 3, Item 3), flat washer (Figure 3, Item 2), and bolt (Figure 3, Item 1) on engine breather
tube (Figure 3, Item 4).
Figure 3. Clamp.
0025
8. Turn battery disconnect switch to ON position (WP 0005).
9. Start engine and check for leaks (WP 0005).
END OF TASK
END OF WORK PACKAGE
0025-3/(4 blank)
