TM 5-3805-255-14
0036
REMOVAL CONTINUED
WARNING
Lifting cables, chains, hooks, and slings used for lifting must be in good condition and of
suitable capacity. Failure to follow this warning may cause injury or death to personnel and
damage to equipment.
8. Attach a suitable lifting device to grille and radiator unit. Remove bolts, nuts, and washers from lower radiator
mounting brackets and grille.
9. Slowly raise grille and radiator unit and move it back until fan housing clears fan blades. Lower grille and
radiator unit to floor. Place in properly supported position.
WARNING
Radiator and oil cooler are heavy. Properly support radiator and oil cooler before
separating from grille. Failure to follow this warning may cause injury or death to
personnel and damage to equipment.
10. Support radiator and oil cooler in properly supported position. Remove lifting device from grille.
11. Remove hardware, upper radiator mounting brackets, radiator, and oil cooler from grille.
END OF TASK
CLEANING AND INSPECTION
00036
1. Clean and inspect all parts IAW General Maintenance Instructions (WP 0019).
2. Inspect radiator for cracks, holes, or leaks. Inspect interior for scale, rust, or deterioration. Repair or replace if
damaged.
END OF TASK
INSTALLATION
00036
1. Install upper radiator mounting brackets, hardware, and radiator and oil cooler on grille.
WARNING
Lifting cables, chains, hooks, and slings used for lifting must be in good condition and of
suitable capacity. Failure to follow this warning may cause injury or death to personnel and
damage to equipment.
2. Attach a suitable lifting device to grille and raise entire unit into position. Carefully work unit forward into its
proper mounting position with radiator fan shroud around fan blade.
3. Line up lower radiator mounting brackets with frame brackets and install flat washers, bolts, and nuts. Install
grille mounting hardware. Remove lifting device.
4. Connect hood to grille, and secure with flat washers, bolts, and nuts.
5. Install wires on rear driving lights, stop lights, and backup alarm.
6. Install muffler (WP 0035).
7. Install air cleaner extension pipe (WP 0029).
8. Connect transmission hoses to oil cooler.
0036-4
