TM 5-3805-255-14
0056
INSTALLATION CONTINUED
3. Thread axle tool into tapped pilot hole in axle shaft (Figure 8, Item 2). Install axle shaft in axle housing (Figure
8, Item 1).
Figure 8. Axle Installation.
0056
4. Carefully inspect thrust button (Figure 9, Item 1) in planetary cover (Figure 9, Item 2) for excessive wear.
Replace cover if required.
Figure 9. Thrust Button Inspection.
0056
5. Position new gasket (Figure 10, Item 4) on planetary cover (Figure 10, Item 3), being careful to align bolt holes.
6. Position cover (Figure 10, Item 3) and gasket (Figure 10, Item 4) assembly on carrier assembly (Figure 10,
Item 2); align bolt holes and install eight bolts (Figure 10, Item 1). Tighten bolts to 105 to 115 lb-ft (142 to
156 Nm).
0056-6
