TM 5-3805-255-14
0065
REMOVAL
00065
WARNING
Chock wheels to prevent loader from moving. Failure to follow this warning may result in
injury or death to personnel and damage to equipment.
NOTE
Tag and identify all hoses prior to removal, for ease of installation.
Plug all hoses to prevent contamination and leaks.
1. Disconnect seven hoses (Figure 1, Items 1, 2, 3, 4, 13, 14, and 18), from compressor (Figure 1, Item 19).
2. Loosen four nuts (Figure 1, Item 15) and move compressor (Figure 1, Item 19) toward engine and remove
compressor belt (Figure 1, Item 5) from pulley (Figure 1, Item 6).
3. Remove four nuts (Figure 1, Item 15), lockwashers (Figure 1, Item 16), washers (Figure 1, Item 17), and
compressor (Figure 1, Item 19) from mounting plate (Figure 1, Item 12). Discard lockwashers.
4. Remove cotter pin (Figure 1, Item 7), nut (Figure 1, Item 8), and washer (Figure 1, Item 9) from crankshaft
(Figure 1, Item 10). Discard cotter pin.
5. Use a puller to remove pulley (Figure 1, Item 6) from crankshaft (Figure 1, Item 10).
6. Remove woodruff key (Figure 1, Item 11) from crankshaft (Figure 1, Item 10).
0065-2