TM 5-3805-255-14
0075
REMOVAL CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
39. Attach suitable lifting device to left bracket (Figure 17, Item 5).
40. Remove three nuts (Figure 17, Item 4), lockwashers (Figure 17, Item 3), bolts (Figure 17, Item 1), and washers
(Figure 17, Item 2) from left bracket (Figure 17, Item 5). Discard lockwashers.
41. Using suitable lifting device, remove left bracket (Figure 17, Item 5) from loader and lower onto flat surface.
42. Remove lifting device from left bracket.
43. Attach suitable lifting device to right bracket (Figure 17, Item 6).
44. Remove three nuts (Figure 17, Item 10), lockwashers (Figure 17, Item 9), bolts (Figure 17, Item 7), and
washers (Figure 17, Item 8) from right bracket (Figure 17, Item 6). Discard lockwashers.
45. Using suitable lifting device, remove right bracket (Figure 17, Item 6) from loader and lower onto flat surface.
46. Remove lifting device from right bracket.
Figure 17. Brackets.
0075
END OF TASK
CLEANING AND INSPECTION
00075
Clean and inspect all parts IAW General Maintenance Instructions (WP 0019).
END OF TASK
0075-15
