TM 5-3805-255-14
0075
REMOVAL CONTINUED
30. Remove six nuts (Figure 15, Item 4), lockwashers (Figure 15, Item 3), bolts (Figure 15, Item 1), and washers
(Figure 15, Item 2) from left edge of floor plate (Figure 15, Item 5). Discard lockwashers.
31. Remove four nuts (Figure 15, Item 9), lockwashers (Figure 15, Item 8), bolts (Figure 15, Item 6), and washers
(Figure 15, Item 7) from lower edge of upper floor plate (Figure 15, Item 10). Discard lockwashers.
32. Attach suitable lifting device to upper floor plate (Figure 15, Item 10).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
33. Using suitable lifting device, remove upper floor plate (Figure 15, Item 10) from loader and lower onto flat
surface.
34. Remove lifting device from upper floor plate.
Figure 15. Upper Floor Plates.
0075
0075-13
