• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 18. Lower Floor Plates.
Figure 20. Cab.

Maintenance Manual For Loader, Scoop Type, Ded 4 X 4, Articulated Frame Steer, 4.5 To 5 Cu. Yd.
Page Navigation
  671    672    673    674    675  676  677    678    679    680    681  
img
TM 5-3805-255-14
0075
INSTALLATION CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
11. Install lifting device on upper floor plate (Figure 19, Item 10).
12. Using suitable lifting device, install upper floor plate (Figure 19, Item 10) on loader.
13. Install four washers (Figure 19, Item 7), new lockwashers (Figure 19, Item 8), bolts (Figure 19, Item 6), and
nuts (Figure 19, Item 9) on lower edge of upper floor plate (Figure 19, Item 10).
14. Install six washers (Figure 19, Item 5), new lockwashers (Figure 19, Item 3), bolts (Figure 19, Item 1), and nuts
(Figure 19, Item 4) on left edge of floor plate (Figure 19, Item 5).
Figure 19. Upper Floor Plate.
0075
0075-17


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.