TM 5-3805-255-14
0081
INSTALLATION CONTINUED
0081
6. Start engine and allow hydraulic oil to reach operating temperature. Cycle bucket cylinder several times.
Retorque bolts (Figure 4, Items 1 and 8) to 85 lb-ft (115 Nm) with bucket cylinder under pressure.
7. Check hydraulic fluid level in reservoir and top off as necessary (WP 0018).
8. Connect air line (Figure 5, Item 4) to bucket cylinder (Figure 5, Item 5). Tighten fitting (Figure 5, Item 2).
9. Connect air line (Figure 5, Item 3) to bucket cylinder (Figure 5, Item 5). Tighten fitting (Figure 5, Item 1).
Figure 5. Air Lines.
0081
END OF TASK
END OF WORK PACKAGE
0081-6