TM 5-3805-255-14
0113
ASSEMBLY CONTINUED
18. Install rear planetaries to rear axle (WP 0056).
19. Install rear differential to rear axle (WP 0055).
20. Install rear axle assembly to loader (WP 0054).
21. Rotate planetary hub (Figure 14, Item 1) until oil level line (Figure 14, Item 4) is horizontal. Remove drain and
fill plug (Figure 14, Item 2) and O-ring (Figure 14, Item 3). Discard O-ring. Fill planetary hub to level of plug hole
with 6.5 pt (3.08 L) of recommended lubricant (WP 0018).
22. Install new O-ring (Figure 14, Item 3) on drain plug (Figure 14, Item 2). Install drain plug on planetary hub
(Figure 14, Item 1). Tighten plug.
Figure 14. Lubricant Installation and Check.
0113
0113-12