TM 5-3805-255-14
0121
DISASSEMBLY
000121
CAUTION
Disassemble main control valve on a clean work bench.
Plug or cap valve ports and openings to prevent entry of dirt.
Note orientation of components as they are removed and disassembled.
Failure to follow these cautions may result in damage to equipment.
1. Remove poppet plug (Figure 1, Item 3) from main control valve (Figure 1, Item 1).
2. Remove and discard seal ring (Figure 1, Item 2) from poppet plug (Figure 1, Item 3).
Figure 1. Main Control Valve (Spool End).
0121
3. Remove poppet plug (Figure 2, Item 1) from main control valve (Figure 2, Item 3).
4. Remove and discard seal ring (Figure 2, Item 2) from poppet plug (Figure 2, Item 1).
Figure 2. Main Control Valve (Plunger Cap End).
0121
0121-2