TM 5-3805-255-14
0121
DISASSEMBLY CONTINUED
NOTE
Spacer is found only in bucket plunger. Spacer is not used on machines equipped with
bucket leveler.
9. Remove plug (Figure 4, Item 5) from sleeve (Figure 4, Item 1).
10. Slide piston (Figure 4, Item 2) and spacer (Figure 4, Item 3) (if used) from sleeve (Figure 4, Item 1).
11. Remove and discard O-ring (Figure 4, Item 4) from plug (Figure 4, Item 5).
12. Remove plug (Figure 4, Item 6) from sleeve (Figure 4, Item 9).
13. Slide piston (Figure 4, Item 8) from sleeve (Figure 4, Item 9).
14. Remove and discard O-ring (Figure 4, Item 7) from plug (Figure 4, Item 6).
Figure 4. Pistons Removal.
0121
15. Remove snap ring (Figure 5, Item 1) and spacer (Figure 5, Item 3) from detent sleeve (Figure 5, Item 2).
Discard snap ring.
Figure 5. Snap Ring and Spacer Removal.
0121
0121-4
