TM 5-3805-255-14
0122
ASSEMBLY CONTINUED
Figure 2. Bucket Cylinder.
0122
21. Install bucket cylinder on loader (WP 0081).
22. After installing bucket cylinder on loader, start engine and allow hydraulic oil to reach operating temperature.
Cycle cylinder several times.
23. Retorque cylinder bolts (Figure 2, Item 22) with cylinder under pressure evenly to 170 lb-ft (230 Nm).
24. Check for leaks at all connections made. Check bucket cylinder for proper operation.
END OF TASK
END OF WORK PACKAGE
0122-5/(6 blank)
