TM 5-3805-255-14
0121
ASSEMBLY CONTINUED
23. Working one plunger (Figure 29, Item 4) at a time, slide (DO NOT ROLL) a new O-ring (Figure 29, Item 1),
spacer (Figure 29, Item 2) and split scraper (Figure 29, Item 5) over plunger (Figure 29, Item 4).
24. Using retainer plate (Figure 29, Item 3), with a slight rocking motion push assembly into seal counter bore.
Install two retainer plate capscrews and tighten securely.
25. Repeat steps 23 and 24 for remaining plunger.
Figure 29. O-Ring and Spacer Ring Installation.
0121
END OF TASK
END OF WORK PACKAGE
0121-26