LUBRICATION INSTRUCTION PLATE
The lubrication instruction plate as shown in
Figure 3 provides a list of items to be lubricated on
specific models, intervals of lubrication, and types
of lubricant to be used. However, in addition to the
lubrication instruction plate, it will be necessary to
refer to the Lubrication Section in applicable Op-
erator's Manual for location of lubricating points
and detailed instructions pertaining to lubrication.
SAFETY WIRING DECAL
The safety wiring decal as shown in Figure 4
i n d i c a t e s that the machine is equipped with an
alternator having a negative grounded electrical
Fig. 5. Operating Precaution Plate
system.
OPERATING PRECAUTION PLATE
T h e alternator is a continuous output diode
The operating precaution plate as shown in
rectified alternating current (a.c.) generator that
Figure 5 is located in the center of the steering
develops a continuous output of electrical energy
wheel. This plate provides a few precautions to
at all engine operating speeds (high, low and idle).
follow during machine operation, and also reminds
The trade name for this unit manufactured by
the operator to refer to the Operator's Manua1 for
Delco-Remy is "Delcotron". The output of the al-
additional information that is necessary for proper
ternator is controlled by a transistorized voltage
operation of the machine.
regulator.
TRANSMISSION OR TORQUE CONVERTER
SERIAL NUMBER PLATE
Note: To prevent serious injury to personnel or
The transmission serial number plate is located
e x t r e m e damage to electrical system components,
on the transmission. The torque converter serial
i t should be noted that information contained in
number plate is located on the torque converter.
t h i s manual pertaining to electrical system com-
Both plates are identical except for model number
p o n e n t s will emphasize certain precautions that
and serial number stamped on each plate to prop-
must be followed when servicing the "Delcotron"
erly identify the units. Plate is shown in Figure 6.
charging system.
WARNING
ALWAYS CONNECT, POSITIVE TO POSI-
TIVE - NEGATIVE TO NEGATIVE WHEN
USING BATTERY CHARGER OR BOOSTER
TO PREVENT DAMAGE TO ELECTRICAL
SYSTEM.
TS-4476
Fig. 6.
Torque Converter or Transmission Serial
Fig. 4. Safety Wiring Decal
Number Plate
[ 01-01-3 ]
