Add lubricant recommended on Drive Line Lub-
Add lubricant recommended on Drive Line Lub-
rication Chart until level with plug opening slightly
rication Chart until level with plug opening slightly
below centerline of hub.
below centerline of hub.
Refer to Specifications and Service Data for
Refer to Specifications and Service Data for
capacity.
capacity.
Midmount Bearing: Drain and refill every 1000
R e a r Axle Differential: Drain differential
o p e r a t i n g hours. Remove drain plug located in
every 1000 operating hours. Refill with lubricant
bottom of midmount bearing and allow all fluid to
recommended on lubrication chart until level with
drain out. Reinstall drain plug. Remove check plug
plug opening at center of axle assembly.
from side and breather fill cap from top of mid-
mount bearing. Add fluid through breather-fill cap
Refer to Specifications and Service Data for
hole until level reaches check plug hole. Reinstall
capacity.
check plug. Wash breather-fill cap insolvent, dry
and reinstall. See Drive Line Lubrication Chart for
R e a r Axle Planetary Hubs: Drain planetary
r e c o m m e n d e d fluid.
hubs every 1000 operating hours; then rotate wheel
until arrow on sun gear thrust cap points down-
Refer to Specifications and Service Data for
ward.
capacity.
[ 40-06-2 ]