Figure 0.10
WARNING: To prevent serious injury to personnel
INSTALLATION OF TRANSMISSION
and damage to equipment, use lifting device with
install transmission in reverse order of removal pro-
load capacity of 20 tons minimum.
cedure.
Attach lifting device to two vehicle lifting lugs at rear
Torque all hardware in accordance with torque limits
of loader. Then raise vehicle enough to clear top of
specified in operator's manual.
transmission from loader frame (approximately 3
Replace any gaskets or O-rings with new parts.
ft.).
Fill transmission in accordance with Instructions
P o s i t i o n safety stand two places under vehicle
given in operator's manual.
counter-balance weights and lower vehicle onto
safety stands.
NOTE: Leave vehicle supported on safety stands
to facilitate installation of transmission.
Slide transmission from rear of vehicle.
Change 2
-16.4-
