Figure 41
Install stator support over turbine shaft using caution
Figure 38
as not to damage turbine shaft oil sealing ring.
Install turbine shaft rear bearing in converter housing.
Position new oil sealing ring on turbine shaft.
Figure 42
Install stator support bolts and tighten to specified
Figure 39
Tap turbine shaft in rear bearing.
Figure 43
Apply a light coat of Permatex No. 2 on the outer di-
ameter of the output oil seal. Press oil seal (lip of
Figure 40
seal down) in rear bearing retainer. Position new
Position new oil sealing ring on stator support.
gasket on bearing retainer. Install retainer on studs.
-10-