TM 5-3805-258-10
MOVING AND STOPPING THE VEHICLE
Make sure the antipivot link is in the
carry position.
2. Raise the bucket to the carry position
approximately 40 cm (15 inches) above the
ground.
Pull out the knob to release the
transmission control lock.
It is possible to start the engine when the
transmission control lever is in FORWARD or
REVERSE, but the machine will not move.
Should this happen, move the lever to
NEUTRAL, then to the desired speed and
direction.
WARNING
Be sure the area is clear of
obstructions.
personnel and
43
