950B AIR SYSTEM AND BRAKES
TM 5-3805-258-24-1
SPECIFICATIONS
(1)
(2)
(3)
(4)
(5)
WHEEL BRAKES
Torque for bolts . . . . . . . . . . . . . . 475 * 50 N-m (350 + 37 lb. ft.)
Thickness of lining material:
New . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27,71 mm (1.091 in, )
Minimum permissible thickness in area
of most wear . . . . . . . . . . . . . . . . . . . . . . . . . . .
15.01 mm (.591 in.)
(Measure the lining at both ends because it can wear more at
one end than the other. )
Torque for bolts . . . . . . . . . . . . . . 270 t 25 Nom (200+ 18 lb. ft.)
Thickness of brake disc:
New . . . . . . . . . . . . . . . . . . . .
12.57 to 13,20 mm (.495 to ,520 in.)
Minimum permissible thickness (worn) (in area where pad
anddisc make contact) . . . . . . . . . . . . . . . . . 11.30 mm(.445 in.)
(6) Clearance between pin (6) and brake disc must not be leas
than 0.25 mm (,010 in.) and not more than 3.00 mm (,118 in,).
If clearance is less than 0.25 mm (.010 in.), turn bolt (5) counter-
clockwise one turn, slide pin (6) to get 0.25 mm (.010 in. ) clear-
ance. Tighten bolt (5) again to a torque
of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
45 ~ 7 Nom (33 t 5 lb, ft.)
2-61
