TM 5-3805-258-24-1
9 5 0 B O P E R A T O R ’ S S T A T I ON
E L E C T R I C A L T R O U B L E S H O O T I NG
Lift Kickout
The lift kickout uses a 9G117 Switch Assembly that is activated by a magnet
on the lift arm. When the magnet goes from position A to position B, the switch
electronically connects Pin 1 to Socket 3 of the harness plug. This activates the
9G9891 Solenoid. Socket 3 will keep connected to Pin 1 for about 1/2 second (if
the magnet keeps close to the switch or if it does not), and then it will be
disconnected. The solenoid is activated again each time the magnet goes to
position B after it has first moved away.
LIFT KICKOUT AND BUCKET POSITIONER SOLENOIDS
LIFT KICKOUT SWITCH AND MAGNET
1. Lift kickout solenoid. 2. Bucket position solenoid.
3. Lift kickout switch. 4. Lift kickout megnet.
Lift Kickout Switch
4-128
